5 things to know about fire water storage tanks

Water is essential for our livelihood in many ways than one. It nurtures our human well-being as well as nature flourishes with the availability of water. Apart from life giving qualities, water is also the reason for many persons’ life being saved. Fire is useful in desired quantities for cooking and other purposes like molding, furnaces and industrial applications. But what happens to these places of huge facilities and millions of dollars’ worth equipment when a fire outbreak occurs? An entire organisation and its capital investment might get shattered due to the unfortunate event of a fire breakout.

The loss of human lives is very much a reality in such grave situations. These are the worst possible outcomes in an event of a fire outburst. But it can be easily combated by precautionary measures that can keep the fire in control. Fire water storage tanks are made specially for the use of prevention against fire. Normal tanks might work but not as efficiently as fire water tanks.

The tanks are located in buildings and premises where there might be lack of water storage and flow. They create a fire perimeter connected to water sprinklers to ward off the fire overburn.

Here are 5 Things you must know about Fire Water Storage Tanks:

1. Design and Reliability

Extra high hazard zones like chemical and petrochemical industrial areas need at least a minimum of 10,000 m³ or 100,00,000 liters of stored water can be statically stored as Fire water storage tanks. Moreover, there should be up to or more than 220,000 liters capacity feeder storage tanks at every 1km² or 1000000m² interval area.

These tanks are made up of concrete covered by an impermeable concrete foil. It’s completely water sealed by bonding two metal sheets with the use of silicone. The roof is easily accessible with a metal tip cover. There is also present thermal insulation for the room temperature to have barely any effect on stored water.


  • They are self-sufficient above the ground cylindrically shaped containers.
  • Fast assembly
  • Better surface protection
  • Reaches hard to cover spots during fire
  • Durable for long time use

2. Initial Costs and Post Maintenance

You may think that a water tank once purchased is borne of all costs and not subject to any post sale maintenance. However, this is not true for firewater tanks. These tanks need substantial initial cost amounts which might be much higher than the normal storage tanks. Secondly, there are many national security and regulations which need to be met in order for the parameter region to be considered safe for functioning. This comes under expenses for professional inspections so as to meet regulated guidelines on frequent checkups of fire water tanks.

3. Fire Water Tanks are absolutely indispensable

These tanks are a lifesaving essential in today’s day and age of modern electronics and advanced systems which can be disrupted by the blink of an eye, as the speed of things have progressed ten folds, so has the speed for any unforeseen event to happen out of the blue without warning. Hence, fire water tanks are a complete necessity in most areas of high risk and crowd coverage. Human lives need to be secured during their daily commute, work or place of stay.

4. Easy Installations

Installations are fairly easier to conduct but need to run through only licensed electricians who will install, repair and dismantle at the on-site and take care of wiring systems. A stainless-steel tank will be reliable and suited for protection against rust or corrosion. All stages of installations must be carried out in accordance with the safety protocols, thus bringing in enabled trust and confidence in the workers of that particular plant. It is easy to install only with a professional electrician doing the job. Otherwise, unskilled personnel put to the job might increase unnecessary danger to the site and inevitably himself as well as people around him.

5. Specialised Connections to Water sprinklers

These tanks are specialised in such a way that they are easily connected to the firefighter’s huge water sprinklers used to doze off the raging fire. Some are even fitted with vortex inhibitors to maximize the force with which the water pumps out. Clearing and post maintenance from time to time is also important so that the flow and pressure from the water tank is consistent and full throttle against any fire combat.

Additional things to know:

  • These tanks are completely instructed to be full at all times. There is no foreseeing the sight of disaster.
  • These tanks can be easily replenished. So, firefighters can refill these tanks with ease even in tense situations.
  • These tanks act as great resale valuations. They are highly considered in the estate market as checkpoints when sell offs take place. The existence of a safe and secured fire protection system in a building, facility or institute doubles the value of that property.